|
|
|
We have tested the GO-Global product on workstations that are still running the old P5 80586 Intel 200Mhz Pentium chip and our tests concluded that there was adequate power on these workstations when running all applications through the GO-Global for Windows Client. In fact our test revealed that there was a greater increase in performance when using the GO-Global Client to run desktop applications on the GO-Global server verses applications on the workstation. So if your company still has older workstations with a P5, Pentium II or above, your workstation hardware shouldn’t need to change or be updated.
Updating your server or replacing your server creates the biggest performance enhancement when running GO-Global. Selecting a server with multiprocessors, extra memory along with 320ML SCSI hard drives can make all the difference in extra performance at your company. Bottom line it cost less to replace one server then it does to replace all of your workstations during an upgrade cycle.
Your server may already be slated for replacement within your upgrade cycle which means you may be only adding GO-Global to your server. A huge saving comes from not having to install client application software on any of the workstations in your company. The only software you need to install on the workstation is the Operating System and the Internet Explorer.
Take a look at these real examples below, look at how much money is spent by updating, maintaining and setting up new computers. The tables below are examples based on real expenses that companies incur using a Microsoft Client Server configuration. The cost savings may vary depending on the number of computers in your company and the cost of the IT professional installing your applications but in any case these costs will be eliminated when you switch to a GraphOn GO-Global Server. |
|
LETS LOOK AT HOW GRAPHON CAN START SAVING YOUR COMPANY MONEY WITH GO-GLOBAL |
|
Whether your workstation hardware is starting or ending its life cycle you can extend the life span of your workstations for a much greater timeframe if you install and use a GO-Global server. |
|
Page 20 |
|
You don’t need to spend lots of time and money to upgrade workstation application software anymore! Simple! Fast! Thin Client Technology made easy - Installs in 15 Minutes.
Proven accelerated performance even when you use your old workstation hardware.
Get the most for your money get GO-Global from the GraphOn Corporation. |
|
No Workstation Configuration |
Outside Consultant Fee |
Workstations |
Your Company Saves |
|
3.5 Hours are normally required to setup a new user profile and install normal workstation software applications. These hours are based on actual job sheets done at customer sites. You eliminate these hours when using GO-Global. |
Average cost for having a consultant install workstation software and setting up a user profile the old way. These hours are based on actual job sheets done at customer sites. |
Total Number of workstations in a small business environment. This number is based on the average small business. |
This may be the amount of money you’ll save if you install a GO-Global Server. |
|
3.5 Hours |
$85.00 Per Hour |
25 Computers |
$7437.50 |
|
Eliminate Workstation Upgrade Cost |
Outside Consultant Fee |
Workstations |
Your Company Saves |
|
1.5 Hours time is required to perform normal workstation software application upgrades. These hours are based on actual job sheets done at customer sites. You eliminate these hours when using GO-Global. |
Per Hour Consultant Fee for installing workstation software. These hours are based on actual job sheets done at customer sites. |
Total Number of workstations in a small business environment. This number is based on the average small business. |
This may be the amount of money you’ll save if you install a GO-Global Server. |
|
1.5 Hours |
$85.00 Per Hour |
25 Computers |
$3187.50 |